Inside VSME's Aluminum Workshop: Cutting, Drilling and Profile Processing

This 21-second workshop clip shows a different production stream from wood-based panel processing. Sheet cutting, CNC drilling and aluminum-profile work are visible in a compact sequence. For buyers considering aluminum-framed doors or aluminum cabinet components, the key issue is how the processed metal part connects with glass, panels, hardware and the final cabinet drawing.

This page focuses on aluminum cabinet factory processing as shown in the individual video, then identifies the order details that still need written confirmation.

What is visible in this video

The clip runs for 21 seconds. It gives direct visual evidence of the following details:

• sheet and profile processing in an active aluminum workshop.
• cutting and CNC drilling operations used to create repeatable component locations.
• metal parts intended to support cabinet and wardrobe production.

These observations are deliberately limited to what can be seen. They are useful for preparing questions, but they do not create a material, performance or delivery promise for a different order.

What should be confirmed for a real project

Before the design is priced or released to production, put the following items into the room brief, drawings or hardware schedule:

• alloy, temper, profile series and surface finish.
• cut length, hole positions and acceptable tolerances.
• corner joining and reinforcement method.
• glass or panel thickness and gasket compatibility.
• protection against scratching during assembly, packing and transport.

That record lets the buyer, designer and factory discuss the same physical scope. It also gives the inspection team clear points to photograph, measure or operate before protective packing begins.

What this short video does not confirm

The video shows processing capability, not the alloy, coating thickness or test results for every product. Those values must be stated in the order specification and inspection plan.

A screen image is also not a finish approval sample. Dimensions, construction, material codes, hardware, electrical parts, installation responsibility, packaging and transport terms should remain visible in the approved quotation and drawings.

See the related VSME product category for more product examples. Product images are design references; the order is developed around the buyer's own room and requirements.