Blum Hinge Systems and Cabinet Motion Technologies: Product Overview

The video is narrower than a general hardware catalogue: it demonstrates a Blum shelf locking device and shows how a small fitting changes the way a shelf is located and retained. That makes the clip useful for a broader lesson about hardware schedules. Brand names alone are not enough; the drawing and quotation need the exact function, location and compatible cabinet construction.

This page focuses on Blum cabinet shelf locking device as shown in the individual video, then identifies the order details that still need written confirmation.

What is visible in this video

The clip runs for 246 seconds. It gives direct visual evidence of the following details:

• the locking device at close range rather than hidden behind a finished cabinet.
• the relationship between the fitting and the shelf it is intended to retain.
• a hands-on demonstration that can be compared with the hardware schedule.

These observations are deliberately limited to what can be seen. They are useful for preparing questions, but they do not create a material, performance or delivery promise for a different order.

What should be confirmed for a real project

Before the design is priced or released to production, put the following items into the room brief, drawings or hardware schedule:

• the exact part reference and approved substitute policy.
• shelf material, thickness and drilling pattern.
• where removable shelves are required and where fixed shelves are acceptable.
• the access needed to install, release or replace the fitting.
• whether the part is supplied factory-fitted or packed for site assembly.

That record lets the buyer, designer and factory discuss the same physical scope. It also gives the inspection team clear points to photograph, measure or operate before protective packing begins.

What this short video does not confirm

This demonstration shows one shelf-retention detail. It does not mean that the same device is suitable for every shelf, loading condition or cabinet construction, and it does not replace the manufacturer's current technical data.

A screen image is also not a finish approval sample. Dimensions, construction, material codes, hardware, electrical parts, installation responsibility, packaging and transport terms should remain visible in the approved quotation and drawings.

See the related VSME product category for more product examples. Product images are design references; the order is developed around the buyer's own room and requirements.